Relax collection

Product information

• Seat cover and foot cover:
  • Standard seat depths of 550 mm (120 mm boards) and 610 mm (140 mm and 185 mm boards).
  • Standard heights of 1050 and 1150 mm in the ceiling. Or custom-made height free.
  • On special request, the depth of the decks can be changed. Please note that changing the depth of the board may result in narrower boards.
  • The height of the lower leg is 430 mm less than the height of the upper leg (from the upper surface of the lower leg to the upper surface of the seat).
• Fitting materials and widths:
  • Heat treated aspen 28×185, 28×140 and 28×120 mm
  • Heat treated magnolia 30×185 mm
  • Black alder 28×140 and 28×120 mm
  • Aspen 28×185 and 28×120 mm
  • Heat-treated tar board 28×140 and 28×120 mm
  • Giant tool 26×140 mm
• Backrests and intermediate space grates:
  • Table top 120 mm
  • Same material as the board slats
• Armrests:
  • If the seat does not end in the wall of the ceiling, the armrest should be
  • Same material as the tile
• Lute frames and mounting accessories
  • The frame is made of softwood (42×66 mm) and moisture-resistant plywood
  • Feet with adjustable feet, plastic foot and steel screw +- 20 mm adjustment
  • The screws are electro-galvanised or brass-plated, highly resistant in damp environments
  • The board package comes with plywood sheets for fitting
• Sauna stools
  • Standard 500×800 mm (height 380 mm), single-level
  • 2-high 600×800 mm (height 550 mm 275+275)
  • The riser feet are always equipped with adjustable feet, plastic feet and a steel screw with +-20 mm adjustment.
  • If the height of the stool is more than 1150 mm or the space can accommodate a wider stool, we recommend a 2-legged stool or a specially sized riser.
• Before you start panelling, you should take into account
  • Height of the reinforcements of the upper decks
    • The centre of the board reinforcements is installed at 990 mm (board height 1050 mm) or 1090 mm (board height 1150 mm) above the floor.
  • Attachment to the lower deck
    • If the bottom plate ends in a wall, reinforcements are needed for the bottom plate. The centre of the bracket is installed 570 mm (board height 1050 mm) or 670 mm (board height 1150 mm) above the floor.
  • Installation height of the backrest of the board
    • The recommended height of the backrest is approximately 125 mm from the top surface. The upper edge of the backrest is 1430 mm (board height 1050 mm) or 1530 mm (board height 1150 mm) above the floor. Backrests do not require reinforcement under the panels. Please remember to check at the design stage that the backrest fits under the sauna windows.
• Relax XL
  • The Relax XL model has no spaces between the upper and lower leg, the footrest continues under the seat cushion.